Description
What Is This Product?
The Skyliner 33 Poster Gripper is a one-piece, clear plastic profile for hanging banners and POS posters from the ceiling. It grips along the full width of the graphic, so the display hangs level.
It's designed for thicker materials such as heavier coated papers, PVC banners and board-backed graphics. Because the body is clear, shoppers notice the signage rather than the hardware.
Hanging loops are sold separately and slide into the gripper to attach it to the ceiling. Each gripper is cut to order, with a minimum cut length of 150mm.
Key Benefits
- Holds Thicker Material
Grips heavier coated papers, PVC banners and board-backed prints, so you can use one hanger for more of your campaign graphics. - Full-Width Grip
The profile holds the graphic along its whole edge, which keeps banners straight and stops corners drooping. - Clear, Low-Visibility Profile
The clear plastic hardly shows overhead, so the signage stays the focus. - Cut to Your Length
Grippers are cut to order from 150mm, so each one fits the width of your banner or poster. - One-Piece Design
There are no separate top and bottom parts to line up. The graphic goes straight into a single profile. - Economical for Store Rollouts
The Skyliner 33 is a low-cost way to hang banners, which helps when you're fitting out several stores or changing campaigns often.
Required Accessories
The Skyliner 33 doesn't come with hanging loops. To hang it from the ceiling, you'll need to order these separately:
- Skyliner 33 Hanging Loops (87.7316): Clear slide-in loops that attach the gripper to ceiling hooks or wires.
How It Differs From Other Skyliner Grippers
The Skyliner range covers different material types. The Skyliner 33 is the one to choose for thicker substrates.
- Skyliner 24 Hanging Poster Rail | Clear: A snap-shut rail with a very tight grip, designed for thinner paper posters.
- Skyliner 24 Hanging Poster Rail | Black: The same Skyliner 24 profile in black.
- Skyliner 26 Hanging Poster Grippers: A flexible gripper with a side hinge, designed for fabrics.
- Skyliner 41 Black Hanging Poster Gripper: A round black PVC tube with a V slit, supplied at a fixed length.
- Skyliner 11 Hanging Poster Gripper & Loops Set: An aluminium kit with top and bottom rails, end caps and hanging clips.
Ideal Applications
The Skyliner 33 is used in supermarkets, department stores, DIY retailers, exhibition halls and shop windows.
- Hanging PVC promotional banners above supermarket aisles
- Suspending board-backed category signs in large-format stores
- Overhead campaign graphics at exhibitions and trade shows
- Window displays using heavier coated paper posters
- Flexible edging channel for commercial and industrial applications
View our full range of Poster Grippers.
Specification
| Application | Ceiling Mounting & Hanging |
| Product Availability | Cut To Order |
| Material | Plastic |
| Colour | Clear |
FAQs
What is the Skyliner 33 poster gripper used for?
The Skyliner 33 is a staple component for retail display teams, wide-format printers, visual merchandisers, and shopfitters who need a clean, repeatable method for hanging signage from ceiling tracks or hooks. Typical applications include:
- Suspending promotional banners and POS posters from ceiling hooks in-store
- Hanging window display graphics at the top and bottom edge to keep them flat
- Weighting the lower edge of suspended signage to prevent curling or movement
- Creating neat, frameless suspended displays for retail, exhibition, and event environments
What is the difference between the Skyliner 33 vs other poster gripper sizes
The Skyliner range is available in several profiles. The Skyliner 33 is the go-to choice for thicker print substrates where a firmer grip is needed. For thinner papers and lightweight graphics, the Skyliner 24 may be more appropriate. If you're unsure which profile suits your material, samples are available on request.