Self-Adhesive Foam Pads

Description

What Are Self-Adhesive Foam Pads?

Self-Adhesive Foam Pads are small squares and rectangles of white polyethylene foam with adhesive on both faces. Peel one off the roll, press it onto the back of your sign, then press the sign into place on a wall, fixture or display.

The pads come in three sizes: 25 x 12 x 1mm, 25 x 25 x 1mm and 25 x 25 x 10mm. They are kiss cut, which means the backing liner stays whole while each pad is pre-cut, so you can lift them off one at a time without scissors.

Each size is sold by the roll, with between 300 and 4,000 pads per roll depending on the size you choose. They are made for lightweight signage such as card, paper, foamboard and thin plastic.

Key Benefits

• Kiss Cut On The Roll
  Each pad lifts straight off the liner, so installers can work through a large batch of signs quickly without cutting tape to length.
  
  
• Double-Sided Adhesive
  One pad fixes the sign and the surface at the same time, with no screws, pins or drilling.
  
  
• Two Depths
  The 1mm pads keep signs close and flat to the surface. The 10mm pads stand graphics off the wall for a raised, layered look, or bridge small gaps on uneven surfaces.
  
  
• Foam Cushioning
  The polyethylene foam gives slightly under pressure, which helps the pad grip on surfaces that are not completely flat.
  
  
• Bulk Rolls For Rollouts
  Rolls of up to 4,000 pads mean one order covers a multi-store campaign or a season of in-store signage changes.
  
  
• White Foam
  The white pads sit discreetly behind most light-coloured signs and card graphics.

How They Differ From Adhesive Foam Pads

We also sell Adhesive Foam Pads - 25 x 25 x 1mm - Pack of 4. That product is a small pack for one-off jobs or for testing a fixing before you commit to a larger order.

• This Product: Supplied on rolls of 300 to 4,000 pads, in three sizes, for regular or large-scale use.
• Pack of 4: Four 25 x 25 x 1mm pads, for a single sign or a quick trial.

Typical Applications

These foam pads are used in supermarkets, convenience stores, pharmacies, department stores and garden centres, wherever lightweight signs need fixing quickly.

• Mounting promotional posters and card signs to walls and fixtures
• Fixing header cards and graphics to shelving, gondola ends and FSDUs
• Attaching foamboard or thin plastic signs to window frames and pillars
• Creating raised, 3D-effect graphics with the 10mm deep pads
• Securing small labels and point-of-sale cards to display units

Need a different fixing? Browse our full range of Tapes & Magnets 

Specification