Description
What Is This Product?
Cliphead Single Prong Display Hooks are plastic merchandising hooks designed to clip onto the edge of a display panel rather than push through it. The rear Cliphead grips the edge of cardboard, corrugated card or plastic panels between 2mm and 5mm thick, including most FSDUs, so no pre-punched holes or slots are needed on the fixing edge itself.
Each hook is made from Glass-Reinforced Nylon and has a single prong with a wide backing plate. The backing plate spreads the weight of the hung product across the panel rather than concentrating it on one point, and the arm itself is ridged along its length to keep merchandise from sliding or bunching up at the tip.
The hooks are supplied in three arm lengths (40mm, 100mm and 150mm), in white or black, and are sold in a pack of 100.
Key Benefits
- Rear Clip Fixing
Fits straight onto the edge of a panel with no need to pre-drill or slot the board, which speeds up display assembly on the shop floor or in the warehouse. - Wide Backing Plate
Spreads the load of hung products across a larger area of the panel, reducing the chance of the hook tearing through cardboard or corrugated card under weight. - Ridged Arm Design
Keeps products spaced out along the hook instead of sliding down to the tip, so packaged goods stay easier to read and pick from the shelf. - Three Arm Lengths
40mm, 100mm and 150mm options let you match the hook to the depth of the product, from small blister packs to bulkier bagged items. - Panel Thickness Range of 2–5mm
Covers most standard cardboard, corrugated and FSDU board thicknesses, so the same hook works across a range of display builds.
How It Differs From Cliphead Double Prong Display Hooks
The Cliphead Double Prong Display Hooks use the same rear clip fixing and backing plate as this single prong version, but add a second prong. The extra prong gives better support for heavier or wider-based products, and helps stop items rotating on the hook. If your products are lightweight or have a single hanging hole, the single prong version covers the same panel thicknesses and lengths at a lower cost per hook.
Ideal Applications
Cliphead Single Prong Display Hooks are commonly used across FSDU manufacturing, permanent POS displays, promotional stands, packaging production and retail shopfitting. Typical uses include:
- Hanging single-hole blister packs on FSDU side panels
- Fitting lightweight product hooks to corrugated promotional bins
- Adding hanging capacity to cardboard counter displays
- Building out temporary POS units for seasonal campaigns
- Retrofitting hanging space onto existing plastic display panels
For other fixing types and prong configurations, see the full Range of Retail Display Hooks.
